Thought it might be a good idea to let you know what we're working on adding!
I can only have .357 Dies to make other than the Keith SWC. Our current dies are only capable of making a SWC bullet in either Jacketed or Plain lead. We have a set ordered to make a RN, Keith as well as a Hollow Base and Hollow Point, Button Wadcutter of either solid or Hollow Base. The Hollow Base should be good for the old .38 S&W as well as other old .38's that have oversized throats and barrels.
Dies have been ordered to make .312/.311/310 and a .309! set of make bullets for the 7.7Jap, 7.62 Russian, .303 British for use in the Sniper matches that are cropping all over. I originally ordered to be a 8S Ogive with a Plain Base and wasn't going to add a Rebated Boattail due to the consider cost of the die. However, demand was so high I changed the order to make it happen. Richard updated me last week (3rd week of Janurary) that he had 2 other calibers in front of me but he also suggested I add the .309 cailber to the mix. So I did! He said this won't add any additional pressure to .308 cailber guns and it adds life to older/worn barrels so coming soon! .309 caliber bullets as well. Still no word on the Dies as of mid March. Richard did say they would be coming soon so still hopeful before this month is out. Lets not forget this is the correct diameter for the 7.65 Argentine as well. Stay Tuned!
New Light weight .400 bullets on the way. Richard Corbin has announced he will have a shorter .40 cal jacket soon that will allow for lighter wieght .40 call bullets great for .40 S&W, 38/40 as well as the 10MM and anything you might want a .400 bullet for. I am looking forward to getting some of these in. Check out the 180 .40 cal's I just posted!
I have a .41 Long Colt bullet now but I have sent some off to a couple Gentlemen who are more experts than myself to evaluate so haven't posted it yet. I don't want to put it out till I am sure of it. It is a .401 Diameter with a Heel and Hollow Base. One I rough up the full diameter of the shank of the bullet to hold lupe it is a .405 OD. The Heel is .200 of an inch Long and I can make any weight you want to use. I think personally the 160-180 grain is probably going to be the best for the way I designed it and have some 180's out of for evaluation. I personally don't own a .41 Long Colt so am depending on Bob Shell and John Watson to let me know if I got this right or not? They are both experenced with the Cartridge so upon their eval, I will be posting it. I have dies and brass to load it if the bullet works as I hope! I will keep you posted and am happy to send some samples if anyone wants to give some a try.
I have just added the new "50 cal LIst Bonded Super Match" that I have named after My friends Martin and Shirley List of Tryon Ok. They helped me develop this bullet and test it so they get the billing for it. They tried this past weekend at Raton NM at the WC on Saturday and had fantastic Results which I posted a shot on my FC page of. They will be testing it in Competition this weekend of June 12-14 at Alliance NB so I wish Martin the best of luck with it! Hopefully we have a winner and it wasn't a fluke at Raton! Good Luck Martin!
Just added a Truncated Cone .452 Die. This makes a really nice Hollow, and soft point .45 Bullet. I got it for a .45 Win Mag project but I can see lots of applications for it. Hope to find time to try it in the Goverment soon. With a short Meplat, has a nice flat point to really add some Smack to impact on it!
Stay Tuned for further updates and additions!
Do not hesitate to let us know your what you're looking for and if you think there is a market for it.
I will order custom dies to meet your needs if I feel there is enough demand for it.