Custom Bullets

Custom Bullets

 

.45 125 gr

..45 ACP Light Weight Bullet

This is the Bullet that Bob Shell tested in a Desert Eagle for Ammoland in June of 2014. I had in mind that this would help tame the recoil in lighter weight guns and give an excellet bullet that will without a doubt expand at the Velocities generated with the lighter weight bullet. Bob has tested many of my bullets and gave this one a good review in this model. This functions in any .45 fullsize or compact and is the only way you can guarente expansion in the .45 ACP cartridge. Bulelts won't expand below 825 fps and this one will certainly pass that reaching 1000 FPS+ depending on barrel length.

These sell for $22.00 for a bag of 50.

 

 The Big Brother Special is a loght weight .44 Hollow Cavity bullet for light framed guns to reduce recoil and make the 329 pleasent to shoot. I have shot my Big Brothers gun and found I enjoyed about as much as a .454 Casull with full powered loads! He was commenting on how he couldn't hit as well as with this 6" model 29 so I thought a lighter weight bullet that would tame recoil and to actually allow him to HIT the target might be in order.

I keep telling him it doesn't matter what he shoots if he MISSES! This is a hollow cavity design that the leas is beneath the tip of the bullet. There is a large cavity in the nose so it will expand without exception at Magnum velocites and penetrate deep enough to do what is needed and leave a massive crater in its wake. He even has commented that he can hit the target again! Imagine that, tame the recoil alllows him to put a large diamenter bullet with lots of velocity on target.

I am excited about Rugers new SP100 in .44 Sp that I wil have to have when I can find and affored. Perfect for these light weight dynomites. Will update with photo's as soon as I have the chance.

20170124 123023 resizedThis is a 140gr hollow cavity bullet that I make for my older brother to use in his 329 S&W. He was complaining about the brutal recoil of full powered loads of 240 and 180gr.

He usies the max load data for a 180 and says it is pleasent to shoot and low and behold, he can actually hit regularly with at 25 yds now! imagine that. Dropping the bullet weight reduces recol and still lays plenty of bullet on targe in the 1200+ fps and he can actually hit the target. I am always telling him it doesn't matter what he shoots if he MISSES! I took his suggestion for the name of the bullet will post photo's asap for those with any interest.

I am supper excited about the New Ruger SP100 in .44 Special. My kind of gun and I will have to have one soon as I can find and afford.

I am selling these for $20.00 per 50.

45 TC 300gr 315 gr 325 gr

.45 Heavy Weight Bullets

Image shows a 300 gr, 315 gr and a 325 gr. These are Truncated Cone but can be style including TCSP,  RN, RNHP, WC, HPWC (With Exposed lead). A Hollow Cavity with Jacketed walls can be made lighter if requested.

These uses a .840 Length jacket and is a great bullet for the .454 Casual and the .45 Win Auto Mag Round for which I but these together for. Jacket is thick enough to withstand the Casuals pressures and will easily withstand Velocites of 2400 fps or higher.

I am selling these for $0.38 each but only have 1k of jackets. Don't miss out on this great bullet and customize to meet your needs. Just let me know what you are looking for.

 

Bond Any Bullet

$0.08 ea

Just about any bullet can be bonded If the lead in the bullet all fits in the Jacket. That doesn't mean it can't be a lead tipped bullet! It just means that the the bullet must start out with a weight that allows for the lead to fit fully inside of the jacket before it is formed into the final shape.

Bonding is a means of taking two dissimalar metals (Jacket/Core) and locking them together. The idea being they the core will not slip or seperate inside the jacket due to stress during firing or upon impact typically with hunting bullets.

This is accomplished by applying a chemical that allows the two dissimal materials to bond atomically with heat. If the lead is melted and if the quanity is greater than will fit in the jacket, it will just run down the outside. If the jacket has a long Ogive, this isn't an issue since the lead witll just move forward and form the lead tip as desired of if you are making a hollow cavity with a punch, it will be displaced and moved forward but you can't have an excess so please don't ask for a bonded heavy lead tipped bullet pistol bullet with a straight side or little tapper. Not possible!

This does discolor the bullet jackets and I do my best to clean up the jackets as best as possible but don't expect them to be bright and shinny. I don't have the expensive equipment of the big boys but can offer you unlimited choices in wieghts and other options you will never get from the big boys. Why you come to a custom bullet maker!

Add Cannelure to any Jacketed Bullet

$0.04

$0.035 for over 100 bullets

Put a cannelure to a jacketed bullet to the Customers specifications up to .70 caliber. It will increase bullet diameter slightly but won't raise pressures any as it is only displacing material which will just be pushed back into place as the bullet goes down the barrel. Amount of increase in size is dependent on depth of Cannelure

I will add this in either a one ring or two ring on long heavy bullets at any distance from the base of the bullet to meet the customers needs on any custom or custumer supplied bullet.

Be aware than putting a deep cannelure in a bullet displaces material and will change the diamenter of bullet so is only recommended for use on bullets for heavy recoiling loads.


NEW LOWER PRICE

.45 Autoloader Target Bullet

45 autoloader target

Sold in Quantities of 100  $21.00

Base Style:  Bevel Base Target Bullet 185 gr

Nose Style: Special Autoloading design to feed in all automatic's for clean fuction and superb accuracy following the design of the famous FC71 HB used by AMU in the 70-80's to win matches around the world. I make this in a 185 gr weight like the suberb WC load but will make it to any weight anyone desires.

These ship USPS small box freight and can fit 300 easily in a small box for $5.90.

$21.00
Quantity:

.40 Cal 160 gr Hollow Point Jacketed Bullet

40 160gr

Image shows the bullets with one loaded in a .40 S&W for Scale.

Sold in Quantities of 50 $16.00

Base Style:  Plain Base

Nose Style: Hollow Point

This is a great 165 gr .40 cal bullet great for the .40 S&W but but would be really good in the in the 38/40 in either a rilfe or pistol and explosive in a 10MM! This has a Cannalure already on the bullet for crimping for use in a tubular magazine as well as autoloaders. This bullet has a .011 thickness at the bullet mouth so will upset at low velocities and I am leaving a generous cavity in the bullet nose so this an excellent game or defensive bullet. The Jacket is shorter to make a lighter weight bullet and makes a beautiful 160 grain round and if you want a Soft Point Round Nose or a Lead Flat Tipped Bullet, this is a great jacket for those applications as well, I have only made a Hollow Point at this time. Easy enough to make any of the others if you would desire. Just drop me a note.

Firing these into Water Filled milk jugs this bullet Exploded the frist and pentrated and dented the back of the 3rd retaining all its core weight but shed the jacket making a perfect mushroom.

Fired .40 cal BulletFired from S&W 4006 at 10 yds.

You can order less then the full box price if you desire to try some like any bullet offering. If you wish to try some samples, please feel free to contact me.

I ship these USPS and can fit up to around 250 or so in a small box for $6.00 shipping.

41 Long Colt 


.41 Long Colt Custom Bullets 180 gr

Lubed with SPG for Black or Smokeless loads

Sold in Quantities of 50 $18.00

Base Style:  Heel/Hollw Base

Nose Style: Blunt Round Nose

This took over 3 years to acquire but I finally got it in! Why you might ask would I make a 41 Long Colt bullet? In dicussions with Bob Shell on what would be a good "Odd" bullet to make? He suggested I contact his good friend Bernald at Gad Custom Reloading for ammo that was popular and he said he couldn't keep up with request for the .41 Long Colt so I contacted Dave Corbin and the process began. In researching the cartridge I ran across Harry Owens well written article on "Everything you want to know about the .41 Long Colt" and with his help and with discussions with Bob Shell. I worked out the design of the bullet you see at the top of the page.

The bullet is a .5 Ogive and has a Heel .200 in length. I decided to make it a hollow base since this either will help or it won't but it can't hurt! I personally like hollow base bullets in the old calibes since they do help especially in guns with bores that are all over the place like the .41. The bullet finishes out at .401 but with the knurling to hold the lube for the outside lubed bullet it finishes to a final diameter of .405. The long bearing surface of the bullet allows it to center and the skirt bells to grip the rifling. Harry's first reports on shooting samples for me are, "It appears I have a winner".

I am offering this in a 200, 180 and a 165. Since the sights are fixed and these old guns aren't exactly easy to get on target, I am offereing the different weights to allow you to choose what might be best for your shooting. Either Black or Smokeles and to help you get your gun to hit point of aim at your required distance. The lighter weight will allow you to raise your point of implact so that will help you get closer to your point of aim. For Black Powder, I recommend the 180 for the Case Capicity since the original cases were ballon head and you can't get near that leval of powder in a modern case or perhaps the 165. I can make any weight you like, just call or drop me a note and we can work on anything specific.

I do have dies and brass and will be offering ammo once the testing is done by my design friends, I have meet Bob on a few occasions and hope to meet Harry someday. In the meantime, I thought it was appropriate to offer the bullets to the public since that was the goal of this project.

These are hand lubed with SPG so are appropriate for either Black or Smokeless powder and they are being tested with both. Harry's first test were with smokeless as he is waiting for good weather to shoot the Black Powder loads outdoors.

NOTE: Thunder an DA users, you will need to trim cases as the bullets will be to long to fit in your cylinders without trimming cases to a total length 1.010. The shorter cylinders of these models will not accept bullets with the Starline cases without first trimming. For Ammo request, please let me know your firearm model so I can make sure we don't have any issues with case length.

I ship bullets USPS in a small box for $5.95 + $1.50 packing fee. For more than a single box, it will require a larger box that ships for $12 and can fit up to 6 boxes plus the $1.50 per box packaging fee to protect the Hollow Base bullets.

You can review Harry's article at the following Link: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB4QFjAA&url=http%3A%2F%2Fharryo.sixshootercommunity.org%2F&ei=OeUuVZj2IK3-sAT7noDYAw&usg=AFQjCNFnyf0-PO8hjfyxpRP03c7DYEhcuw&bvm=bv.91071109,d.cWc


.40 Cal Hollow Point Jacketed Bullet

180 .40 cal pic

Sold in Quantities of 50 $18.00

Base Style:  Plain Base

Nose Style: Hollow Point

This is a great 180 gr 10MM bullet and .40 S&W but really shines in the 38/40! This has a Cannalure already on the bullet for crimping for use in a tubular magazine as well as autoloaders. This bullet has a .011 thickness at the bullet mouth so will upset at low velocities and I am leaving a generous cavity in the bullet nose so this an excellent game or defensive bullet. The Jacket is almost to long to make a 180 Grain Bullet out of and I had to be "Creative" to make this work but have managed to pull off making a 180 gr bullet with this jacket and feel you will be very pleased with the results.

You can order less then the full box price if you desire to try some like any bullet offering. If you wish to try some samples, please feel free to contact me.

I ship these USPS and can fit around 250 or so in a small box for $5.90.

429 SWC Pic

.429 Lead Plain Base Keith SWC Bullets

Sold in lots of 50. 240 gr 12.00

NOSE: Keith Semi Wad Cutter

Base: Plain

Bullets are made to order so you can choose any weight, just send and email or give me a call and we can discuss your specific desires on custom orders. I have made 140 to 325 gr so call me or drop a note if you have any questions.

Bullets would look like the image in the are 140,200,250,275 Half Jacket, 300, 300 Half Jacket. Half Jacket adds another 8.00 per 50.

Bullets shipped USPS small box freight usually around 250 in a box for $5.90.

38 Half Jacket .145gr

357 Half Jacket Bullet Light 135 Gr

145 gr bullets pictured.

Sold by the box of 50 135 gr $11.00

Bullets would look like the image depending on weight desired..Bullet weights can be adjusted to the customers desires as they are customed made to order. I am happy to make anything from 135-150 grains depending on how much lead you want exposed in this shorter jacket.

I have added a new die that allows me to put a taper on the bullet jacket at the point of contact with the core. This does two things, 1st it allows for a tight crimp on the bullet without a cannalure and crimps the jacket to the core so no issue with the core ever seperating during firing which has been reported with straight walled jacketed bullets in the past. Second, this puts a put of "freebore" on the bullet before it makes contact with the rifling so pressures are lower and this will guide the bullet into alignment with any cylinders that maybe out of alignment.  No extra charge since I would just use a different set of dies to make your bullets. This is a 0.012 reduction that I can adjust for longer shankes. Just remember powder capicity if putting a long taper on long bullets.

 

__________________________________________________________________________________________
357 halfjacket

357 Half Jacket Bullet 195 Gr

Sold by the box of 50 195 gr $14.00

This jacket makes a nice 195 gr bullet without to much lead exposure. Let me know your desires.

Bullets would look like the image with more lead exposed at the shoulder.

Bullet weights can be adjusted to the customers desires as they are customed made to order. I am happy to make anything from 135 to 220 grains in a half jacket with a longer Jacket.. Longer Jackets are more expensive obviously as well as the cost of lead.

 

__________________________________________________________________________________________
357 halfjacket

357 Half Jacket Bullet 165-175 Gr

Sold by the box of 50 165 gr $13.00

This jacket makes a nice 165 to 175 gr bullet without to much lead exposure. Let me know your desires.

Bullets would look like the image.

Bullet weights can be adjusted to the customers desires as they are customed made to order. I am happy to make anything from 135 to 220 with a longer Jacket.

 

429 SWC Pic.429 Lead Plain Base RN Bullets

Sold in lots of 50. 240 gr Round Nose $12.00

Bullets are made to order so you can choose any weight you would like so email me or give me a call and we can discuss your specific desires on custom orders. I have made 140 to 325 gr so call me or drop a note if you have any questions.

Bullets would look like the image in the are 140,200,250,275. Included are  300 gr Half Jackets for comparision. Half Jacket add's .05 a bullet.

Can add a Hollow Point or Hollow Base if dsired to any lead bullet.


429halfjacket

.429 Half Jacket Bullets

Sold in lots of 50.  $20.00

Bullets are made to order so you can choose any weight, HP can be added if desired. We can discuss your specific desires on custom orders. Great Carbine bullet.

Bullets image is of a 275 gr Half Jacket.  20.00 per 50.

Bullet weights can be adjusted to the customers desires as they are customed made to order. I am happy to make anything from 160-350 grains.

As a side note and for the brave hearted! I can add a taper to the jcacket at the point of contact with the core that will allow you to have a super tight crimp without a cannalure as well as push the limits of the desigh since a shorter shank will lower pressures and allow you to add more powder and thus higher velocities. I can do this to any weight bullet but part of the idea behind this bullet is to lower recoil and add velocity. The taper drops down to 0.415 from .429. This would just be for fun as I have not played with much due to weather and lack of a good platform with which to test on but is another way to play.


 357 bullets

.357 Swaged Lead Bullet               

Sold in boxes of 100 150 gr  $12.00

Bullets are made to order so you can choose any weight from 90 gr's to 200. Drop me and email or call me and we can discuss your specific desires on custom orders.

Bullets would look like the image which shows various weights.

Shipped USPS Flat rate shipping at $5.90, can usually get about 200 a box depending on projectile weight, heavy bullets takes up more space. Also due to these being pure lead, I need to ship these in ammo boxes so there will be a handling charge to cover the cost of the ammo boxes. I can't ship them in plastic bags as they will be damaged and unusable otherwise which will incur a handling charge of $3.00 a 100.

 

 


 

 

38/40 Custom Lead Hollow Base180 gr38.40leadammo

Sold in Boxes of 50

Base Style:  Hollow Base

Nose Style: Flat Point

I now have the dies to make a Hollow Base Lead bullet for this round and here it is! This is great for the old guns using SPG lupe on these custom bullets so they are perfect for Black or Smokeless Powder loads. I think you will find this is a great bullet in any firearm! I make this as a 180 gr but can make any reasonable weight up or down to meet your shooting requirements including dropping the weight for less recoil for quicker followup shots for SASS.

I ship single boxes USPS for 6.00 plus $1.00 handling. More won't fit in the single USPS mailer so I ship those FedEx Ground and that goes $12.60 for up to 4 boxes with the $1.00 a box of bullets handling billed with the shipment. More is not much extra being only a couple dollars until the box gets much bigger.  

______________________________________________________________________________________________________

429halfjacket


.428 Half Jacket Plain Base Bullets 

These are for the 44/40 Carbine and Pistol

Sold in lolts of 50. 180 gr $14.00

Bullets are made to order so you can choose any weight with custom orders plus can add a Hollow Point if desired. Email me or give me a call and we can discuss your specific desires on custom orders. I do put a Cannelure on these, I hadn't on these when I took this picture.

I ship these USPS Flat Rate shipping of $5.90 a box which will usually fit about 400.

 

______________________________________________________________________________________________________________

429 SWC Pic

 

.428 Lead Hollow or Plain Base Bullet

Sold in lots of 50 RNFP  180 gr $13.00

I make a Hollow Base Round Nose Flat Point for this bullet but can make any style, we can discuss your specific desires on custom orders. I have made 140 to 325 gr so call me or drop a note if you have any questions.

Bullets in the image are 140,200,250 Half Jacket,  Perfect for the 44/40 Carbine or Pistol. Can be Plain Base or Hollow Base or even put a Hollow Point in if you desire Customer Choice. Image shows jacketed versions but lead would just be plain or hollow base with same nose config or Std RNFP.

I ship these USPS and can ship UP to 100 in a small box for $5.90 shipping plus $1.00 per 50 for Packaging of the Hollow Base bullets.


50bmgVLD

I AM INACTIVATING THIS ITEM FOR NOW. TO MANY ISSUES WITH QUAITY CONTROL. CHECK BACK FOR AVAILABILTY.

CHECK OUT THE LIST BONDED MATCH

.510 (50BMG) 680-825 br VLD

Base Style:  Rebated Boat Tail (RBT)

Nose Style:Aluminum Tipped

True Match Grade long Range Bullet 750 gr  $1.90 ea
10% FSCA Members contact me to use your discounted Pricing.

For Volume and FSCA Discounts, please email me your order or call me. Please don't order using the web site. Thank You

NOTICE! Aluminum Tips have gone up almost a $05 each in cost. I will have to pass that on with the next order I place when I run out of my current Stock!


50bmg LT VLD w.can
This is a lead tip version of the VLD design (8E Ogive) 750 gr example. This would make a great long range hunting bullet.

.510 (50BMG) 680-850 Gr Lead Tipped w/cannelure

Base Style:  Rebated Boat Tail (RBT)

Nose Style:Lead Tipped

750 gr $1.80 ea

For custom weights just me a call or drop me a note and we can figure out what you desire.

5%% Discounts for Qty Purchases of 100 or more.
10% FSCA Members contact me to use your disconted Pricing for 100 or more.

For Volume and FSCA  orders placed from the website, I will manually discount your orders. Thank You


50calLeadTip

 

This is a lead tip version of the VLD design (8E Ogive). This would make a great long range hunting bullet.

.510 (50BMG) 680-850 Gr Lead Tipped

Base Style:  Rebated Boat Tail (RBT)

Nose Style:Lead Tipped

750 gr $1.75 ea

For custom weights, just drop me a note or give me a call and we can figure out what you are looking for and get those made You.

5%% Discounts for Qty Purchases of 100 or more.
10% FSCA Members contact me to use your disconted Pricing for 100 or more.

For Volume and FSCA orders placed using the web site, I will manually discount the orders.  Thank You.

 


 

50 Cal List Bonded Super Match

 

Sold Each or in Qty's of 100 for a Discount 5% Discount

FSCA Members 10% Additional Discount

Base Style:  Rebated Boat Tail (RBT)

Nose Style:Hollow Point

750 gr $2.08 Ea

This is a Bullet that Martin and Shirley List worked with me on and have tested at FCSA Matches for me so I named it after them. In discussions with Martin, we discussed if it was possible for the Core to be spinning in the jacket of such a massive projectile? Perhaps that was causing some of the misses so we thought we would try bounding the core and it appears that really helps. I don't believe the nose makes a bit of difference! A HP is as good as a Aluminum Tip and those tips are now up to $0.22 Each and take an extra 2 steps to put on and are a pain to get on correctly and cause all kinds of havic. I have even stopped attempting to make them!

At this point, Martin and I feel this is a better bullet. It still takes a lot of time to make these with the bonding process, I spend about 5 minutes making each projectle but am willing to offer a discount to the FCSA Members and a Discount to volume buyers. I have to order a ton of componets to get a discount for volume but the more folks who shoot them maybe I can trim some time off their manufacture.

I am working on getting a Code for the discounts but that is eluding me currently so just drop me a note or call if you are interested in ordering some and we will work it out. I do want to Thank Martin and Shirley for all their help and Support in this endeavor. Long live Long Range Shooting!

5% Discounts for Qty Purchases of 100 or more.
10% FSCA Members contact me to use your disconted Pricing.

For Volume and FSCA Discounts, please email me your order or call me. If you order on the website, I will manually credit you for your discounts. Thank You

 


50bmgpb

510 (50BMG) 680-810 Gr HP

Plain Base Pictured

Base Style:  Rebated Boat Tail (RBT)

Nose Style:Hollow Point

750 gr $1.75 Ea

This is the same nose 8E as the VLD bullets but with a Hollow Point instead of the cost of the Aluminum Tip and the steps required to attach, I can sell for a lower price. I make these in a 750gr but like all custom bullets, I can make any weight you specific.
10% FSCA Members contact me to use your disconted Pricing.

For Volume and FSCA Discounts orders from the the web site, I will manually credit your discount to your order. Thank You


50 Cal PB
 

Image of 750 gr plain base and 850 gr but can make to whatever weight you desire. This is a 6S Spire pointed bullet more suited to hunting. Not necessarily a extreme range bullet but is great for Practice and shorter range shooting but will work for long range depending on your rifle. These require less steps to make thus the lower Price. Heavier bullets get pretty long even in 6S but not like a VLD Bullet.

This is perfect bullet for the 200 yd matches in the lighter weights.
 

.510 (50BMG) 650-850 Gr

Base Style:  Plain Base 

Nose Stytle: Lead Tip or Hollow Point 

$1.60 ea


10% FSCA Members contact me to use your disconted Pricing.

For Volume and FSCA discounts from the website,  I will manually credit you the discount. Thank You


50bmgpbImage of 750 gr plain base but can make to whatever weight you desire. This is a 6S Spire pointed bullet more suited to hunting made with a tubing jacket of .035 straight copper tubing for strong straight penetration and to make a cheaper bullet over commerical jackets. Not necessarily a extreme range bullet but is great for practice and shorter range shooting but will work for long range depending on your rifle since this is a shorter bullet than the 8S VLD Bullets..
 

.510 (50BMG) 680-800 Gr 6S

Base Style:  Plain Base 

Nose Stytle: Hollow Point 

$1.50 ea
10% FSCA Members contact me to use your disconted Pricing.

For Volume and FSCA Discounts using the web site to order, I will manually credit you your discount. Thank You


50 Cal PB


 

.510 (50BMG) 680-850 Gr

Base Style:  Plain Base Tubing Jacket

Nose Stytle: Lead Tip 

750 gr $1.50 ea

For custom weights, just drop me a note of give me a call and we can figure out what you desire.

10% FSCA Members contact me to use your disconted Pricing.

For Volume and FSCA orders placed from the website, I will manually credit your orders with the disount. Thank You


44 jacketed 

.429 Custom Jacketed bullets

Sold in Quantities of 50  15.00

Base Style:  Plain Base

Nose Style: Round Nose (RN), Keith Semi Wadcutter (SWC), Hollow Point (HP), Hollow Cavity (HC), Buttom Wadcutter (WC)

You will find these typically are more accurate than Factory or Mass Produced Bullets. The quaility of Hand produced bullets tyically outshines those made by Automatic Transfer Punch Machines. I can control the quaility and weight to much tighter Specifications plus I can make to any weight and about any style you might desire. Call me for your specific Desires.

Examples are of Weights from 140 for Ultra Light and super fast to 300 Gr for Rifles and Carbines weights of various designs to show examples of designs, jacket lenths and their appearence. Great for all .44 pistols Rifles and Carbines 

5% Discount on orders over 100 Bullets.


 

.452 Custom .035 Tubing Jacketed Bullets

Sold in Quantities of 50  32.00 or just the Jackets for 19.00

Picture shows finished jackets and a 275 gr Hollow Point RN Bullet45 Custom Jackets

Base Style:  Plain or Bevel Base N

Nose Style: Round Nose (RN), Keith Semi Wadcutter (SWC), Hollow Point (HP), Buttom Wadcutter (WC), AutoLoader, Dragon Tooth,ind these typically are more accurate than Factory or Mass Produced Bullets. The quaility of Hand produced bullets tyically outshines those made by Automatic Transfer Punch Machines. I can control the quaility and weight to much tighter Specifications plus I can make to any weight and about any style you might desire.  Great for all .45 cal guns, especially those pushing velocity and wanting deep pentration as well as Rifles using a .452 or .454 Diameter Bullet. These jackets are make from Copper tubing of .035 Thickness and are make for really tough Jobs and can be pushed really hard in guns like the Casul and make great hunting bullets and are great in carbines and can be used to make really hot light weight bullets. Obviously these are made one at a time so they take time to make so they aren't to cheap but they are tough and can be made to any length you desire and can be made to any weight and about any configuration as well. If you want something really exiotic? Lets Talk!

5% Discount on orders over 100 Bullets.